What does the 'Audio-video synchronization adjustment' setting do, and what is its limitation?
As many of the A2DP device users are aware, these devices have high latency (around 200 ms), which causes lip sync issues. This latency is necessary for stable streaming and cannot be reduced. However, lip sync issues can be mitigated by delaying the video stream by the same amount as the A2DP audio delay.
This cannot be accomplished by the A2DP driver alone. Rather, it requires cooperation between the media player program, the Windows Audio Engine (System Mixer), and the A2DP driver.
The diagram on the right illustrates the flow of information in normal (shared mode) operation. The Windows Audio Engine mixes the audio stream data from multiple sources and passes it to the A2DP driver. The A2DP driver then sends timing information back to the Windows Audio Engine, which relays the information to each media player program.
In this case, for this scheme to work, the following must be met:
- The media player uses timing information to adjust the timing of the video stream.
While most modern programs do this, not all of them do.
- The Windows Audio Engine must provide each media player program with the correct timing information.
As of October 2026, the Windows 11 Audio Engine does this properly only in limited cases. It appears that it does not send the correct timing information to the media player program in cases such as the following (not an exhaustive list):
- Another video or audio stream is already running when a video application started streaming.
- After the video stream is paused and resumed.
This is a limitation of the Windows Audio Engine, and unfortunately, there is no way to work around it.
Data flow in shared mode
When the A2DP device is used in exclusive mode, the timing information is delivered directly from the A2DP driver to the media player application. Therefore, it is unaffected by the Windows Audio Engine limitation described above. However, the media player program you use to play the video must be able to recognize the timing information provided by the A2DP driver and adjust the video timing accordingly.
Data flow in exclusive mode